How Galvanized Roofing Sheet Differs From Galvalume

Galvanized roofing has always been an essential part of any type of commercial building construction for its durability and long-lasting performance. Especially the thicker ones (0.2mm) is used on buildings with extensive roof lines. Galvanized roofing, whether thin or thick, are ideal for most purposes. But, many people still tend to opt for thinner galvanized roofing sheets because of cost considerations while building new roofs or installing old roofs on their residential home.

Nhà cấp 4 nông thôn mái tôn kiểu thái đẹp nhất Việt Nam anh Mạnh

But the thin galvanized roofing sheet, even if the thickness is just 0.2mm, the galvanized steel sheet kind pressed from the same soft galvanized steel sheet material will be too weak, which is why the thick variety is the best choice. The reason why thick materials is better is not because the thick varieties offer better protection against weather elements, but because the thicker materials are cheaper nha thep tien che. The thinner materials, particularly the galvanized steel sheet, will provide better protection for your building structure. And you will not need to spend a huge amount of money on coatings to protect your building from weather conditions. The thin materials will only be beneficial to you as far as aesthetics are concerned.

The thick variety of Galvanized Roofing Sheet can be either rolled or bolted together at the beginning of the roof construction, while the thin ones are usually just bolted together at the building’s foundation. The thickness depends on the building application and budget. The two types of Galvanized Roofing Sheet are – roll coated and zam steel coated. The roll coated variety of Galvanized Roofing Sheet uses galvanized steel as the main building material, while the Zam steel coated variety uses zinc. The choice between the two will depend on the building application, budget and materials.

Another difference that exists between these two varieties is that the galvanized steel sheet requires a cold dip galvanizing process in order to obtain its hot-dip galvanized coating. As the name suggests, the galvanized steel coating is applied on the steel before it is hot dipped. In the hot-dip galvanizing process, galvanized steel is exposed to molten zinc and then to hot water. This heating process creates a chemical reaction called peroxide which penetrates the steel and forms the desired layer of coat. The cold dip galvanized roofing process does not create this chemical reaction, so the coating of the steel must be supplied by a hot dip galvanized.

Galvanized Corrugated Roofing Sheets are also available in Galvalume form, which do not utilize zinc. Galvalume consists of finely ground up galvanized corrugated paperboard. A coating of powdered iron is applied over the top of the paperboard to form a protective, non-porous, durable layer over the corrugated paperboard. This coating can protect against the elements, but does not provide any additional protection from rusting and corrosion.

The important thing to remember when purchasing a Galvalume coating is that the specific thickness required will depend upon the thickness of your roof. Generally, a Galvalume coated material will require an extra layer of zinc for better weather protection and overall durability. If you do not have an exact tolerance measurement, it may be a good idea to consult a professional roofer. However, if you have an accurate tolerance measurement, it may be worthwhile to purchase a galvanized Galvalume sheet with a slightly higher thickness to ensure durability against the elements.

Leave a Reply

Your email address will not be published. Required fields are marked *